Moncage touch screen3/17/2023 Take the photo (8/28) from inside the broken television at the bottom right. Look back up to the lighthouse, and slide the blue battery back up to the holder using the ladder. The scene through the telescope will change to night. Now adjust the view so the scales line up with the large pump-jack (nodding donkey) seen through the telescope. Rotate to the right to see the darkened room, and zoom in on the balance scales through the window. Zoom back out and then go down to the shack. Click on the ladder to slide it down, so the battery is next to the lighthouse. Adjust the view so that ladder up here connects to the battery holder in the top room. Zoom out from the shack, and examine the top of the lighthouse. Rotate the view so the hammock in the top room aligns with the awning outside the shack, and the telescope will fall down into the stand. Look at the desk in the new room at the top of the cube, and grab the photo (7/28) beneath the chair here. This will launch a small rocket in a new room through the top of the cube. Rotate the view so that the cable from the fan seen through the top of the cube (after zooming out) connects to the cable near the stack of televisions. Change the channel to the test pattern, then zoom out. Look at the side with the long red conveyor belt and zoom in on the television screen. The crate will now move along the conveyor belt and the view on a side of the cube will change. In the top view, zoom in on the desk, then adjust the view so the Rubik's cube falls down into the crate. Rotate the view to connect the pipe at the top of this area with the pipe you can see through the top of the cube, and a larger box will fall down into the crate. Pull the lever here twice to fill the crate with 2 green boxes. Look through the side of the cube showing the lever and zoom in to the background. This will change the view in the top of the cube. Open the skylight in the roof of the shack. There is an achievement for doing this on the first attempt Quick Reaction. Push the lever, then get ready to quickly rotate the view to align the yellow slide inside the factory with the yellow playground slide outside. Rotate back to the left and zoom in through the double doors, then align the yellow crane arms here and next to the truck. Now rotate the view to align the winch above the open hatch with the large spool in the top of the cube, and the winch outside the double doors - the truck will drive further into the factory. Zoom back out and turn the valve again to fill the area back up with water. Look in the top of the cube and open the safe, taking out another photo (6/28). Zoom in on the large brown barrels inside here and look right to find the next photo (5/28). Align the top of the doors with the bicycle pedal, and the doors will open. On the view of the outside of the factory, zoom in on the double doors. Take the photo (4/28) from beneath the hatch. Rotate around to another internal view of the factory to see a winch above an open hatch. Rotate away and move the lever, then rotate to align the objects again and move the lever - the pedal should now be near to the tyre. Rotate to align the bicycle tyre with the rotating platform and move the lever to rotate the bicycle pedal. Turn the valve visible above the water line in the top of the cube, and the water will drain away. Look at the new side now to see a yellow playground slide. This will result in a door opening, and you will have access to the final side of the cube. Rotate the cube to align the hanging pot plant from inside the first building with the hook in the water scene at the top of the cube. Look beneath the opened trapdoor to find another photo (2/28). Zoom out on the view of the inside of the first building, and move the lever at the bottom of the rotating platform. You will now have access to the top of the cube. Rotate the cube to align the desk lamp with the crane arm. You will now have access to a third side of the cube.īack inside the first building, zoom in on the workbench to the right. Click the trapdoor to slide it to the right, and the truck will drive into the factory. Rotate the cube to align the sliding trapdoor with the back of the broken bridge. Test out the highlight feature as instructed. Rotate to connect the 2 halves of the truck and it will drive to a broken bridge. You will now have access to a second side of the cube. Rotate until you see the trunk, then zoom in and open it.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |